Connectwell STH6 Stud Type Terminal Block With Captive Nuts
35 sq. mm Stud Type Terminal Block – with captive nuts.
These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.
Description
| TECHNICAL DATA | |||
| Rated Voltage | 1000 V | ||
| Rated Current | 125 A | ||
| Tightening Torque | 3 Nm | ||
| Housing Material | Polyamide | ||
| Product Function | Feed Through | ||
| Wire Entry Orientation | Side entry | ||
| Mounting Possibility | DIN 32/DIN 35/DIN 35-15 Rail | ||
| Screw Size | M6 | ||
| Stud Size | M6 | ||
| Operated by | Screw Driver | ||
| Rated Surge Voltage | 8 KV | ||
| Pollution Degree | 3 | ||
| CONNECTION DATA | |||
| Conductor Cross Section Stranded min. | 1.5 mm² | ||
| Conductor Cross Section Stranded max. | 35 mm² | ||
| Conductor Cross Section AWG/Kcmil min | 22 AWG | ||
| Conductor Cross Section AWG/Kcmil max | 2 AWG | ||
| Stripping Length | mm | ||
| DIMENSIONS | |||
| Height with DIN 32 rail | 68 mm | ||
| Height with DIN 35 x 15 mm rail | 70.6 mm | ||
| Height with DIN 35 x 7.5 mm rail | 63.1 mm | ||
| Length | 63.9 mm | ||
| Width (Thickness) | 18 mm | ||
| ORDERING INFORMATION | ||
| CAT. NO. | DESCRIPTION | STD. PACK |
| STH6 | 35 Sq.mm M6 captive nut Type Terminal Block in Grey Colour | 50 |
| STH6BK | 35 Sq.mm M6 captive nut Type Terminal Block in Black Colour | 50 |
| STH6BU | 35 Sq.mm M6 captive nut Type Terminal Block in Blue Colour | 50 |
| STH6GN | 35 Sq.mm M6 captive nut Type Terminal Block in Green Colour | 50 |
| STH6R | 35 Sq.mm M6 captive nut Type Terminal Block in Red Colour | 50 |
| STH6Y | 35 Sq.mm M6 captive nut Type Terminal Block in Yellow Colour | 50 |
| ACCESSORIES | ||
| CAT. NO. | DESCRIPTION | STD. PACK |
| CA501-1M | Din 32 Rail unslotted 1 meter | 50 |
| CA501-1M-S | Din 32 Rail slotted 1 meter | 50 |
| CA501-2M | Din 32 Rail unslotted 2 meter | 50 |
| CA501-2M-S | Din 32 Rail slotted 2 meter | 50 |
| CA701-1M | Din 35 Rail unslotted 1 meter | 50 |
| CA701-2M | Din 35 Rail unslotted 2 meter | 50 |
| CA701-2M-S | Din 35 Rail slotted 2 meter | 50 |
| CA701-1M-S | Din 35 Rail slotted 1 meter | 50 |
| CA701-15-1M | Din 35 Rail 15 deep unslotted 1 meter | 50 |
| CA701-15-1M-S | Din 35 Rail 15 deep slotted 1 meter | 50 |
| CA701-15-2M | Din 35 Rail 15 deep unslotted 2 meter | 50 |
| CA701-15-2M-S | Din 35 Rail 15 deep slotted 2 meter | 50 |
| CA702 | End Clamp in Polyamide 66 suitable for Din 32 / Din 35 / Din 35-15 Rails | 50 |
| CA802 | End Clamp in Polyamide suitable for Din 35 / Din 35-15 Rails | 50 |
| EPSTH6 | End Plate in Grey colour suitable for STH6 Terminal Block | 50 |
| CA774/2 | Pre Assembled Shorting Link Assemblies with 2 poles | 100 |
| CA774/3 | Pre Assembled Shorting Link Assemblies with 3 poles | 100 |
| CA774/4 | Pre Assembled Shorting Link Assemblies with 4 poles | 100 |
| CA509/K16 | Marking Tag Blank suitable for CTS35UNA / CGT35U Terminal Blocks | 100 |
| SCS1/5.5 | Electricians Screwdriver for slotted screws | 10 |
| MC16 | MARKER CARD 16MM PITCH WITH 24 TAGS | 10 |
