Connectwell CENC35 Neutral/Earth Clamp Terminal Block

35 sq.mm Neutral / Earth Clamps
The CENC series clamps are a flexible solution for terminating neutral and grounding wires on bus bar.

Description

TECHNICAL DATA
Tightening Torque 2.5 Nm
Housing Material Polyamide
Product Function Neutral/Earthing Clamps
Wire Entry Orientation Side Entry
Mounting Possibility Panel/Surface
Operated by Screwdriver
Rated Surge Voltage 8 KV
Pollution Degree 3
CONNECTION DATA
Conductor Cross Section Stranded min. 10 mm²
Conductor Cross Section Stranded max. 35 mm²
Conductor Cross Section AWG/Kcmil min 8 AWG
Conductor Cross Section AWG/Kcmil max 2 AWG
Conductor Cross Section Stranded with Ferrule/Lug min 10 mm²
Conductor Cross Section Stranded with Ferrule/Lug max 35 mm²
2 Conductors with same Cross Section Stranded min 10 mm²
2 Conductor with same Cross Section Stranded max 25 mm²
Stripping Length 16 mm
DIMENSIONS
Length 27.3 mm
Width (Thickness) 14.5 mm
ORDERING INFORMATION
CAT. NO. DESCRIPTION STD. PACK
CENC35 35 sq.mm Neutral/Earth clamps Terminal Block in Green colour 50
CENC35BU 35 sq.mm Neutral/Earth clamps Terminal Block in Blue colour 50
CENC35BK 35 sq.mm Neutral / Earth Clamps Terminal Block in Black colour. 50
CENC35G 35 sq.mm Neutral / Earth Clamps Terminal Block in Grey colour. 50
ACCESSORIES
CAT. NO. DESCRIPTION STD. PACK
CA202

End Clamp in Polyamide suitable for Din 35 / Din 35-15 Rails 25
CA509/K6

Blank Marking Tag 100
NES

Plastic support with fixing screw for fixing 10 / 6 mm Bus Bar suitable for mounting CENC4 / CENC16 / CENC35 Earth / Neutral Clamps 50
SCS1/5.5

Electricians Screwdriver for slotted screws 10
NEB6

6mm Bus Bar for mounting CENC4 / CENC16 / CENC35 Earth / Neutral Clamps 1
NEB10

10mm Bus Bar for mounting CENC4 / CENC16 / CENC35 Earth / Neutral Clamps 10
MC6

MARKER CARD 6MM PITCH WITH 72 TAGS 10

Downloads

CENC35.pdf