Connectwell CSC16/3T Spring Clamp Feed Through Terminal Block
16 sq.mm Spring Clamp Feed Through Terminal Blocks
The Spring Clamp is operated by using a screw driver to provide an access to the wire through an opening in the spring clamp. The inserted wire gets clamped on to the current bar when the screw driver is removed.
Description
| ORDERING INFORMATION | ||
| CAT. NO. | DESCRIPTION | STD. PACK |
| CSC16/3T | 16 sq.mm Feed Through Spring Clamp Terminal Block in Grey colour | 50 |
| ACCESSORIES | ||
| CAT. NO. | DESCRIPTION | STD. PACK |
| CA701-1M | Din 35 Rail unslotted 1 meter | 50 |
| CA701-2M | Din 35 Rail unslotted 2 meter | 50 |
| CA701-2M-S | Din 35 Rail slotted 2 meter | 50 |
| CA701-1M-S | Din 35 Rail slotted 1 meter | 50 |
| CA701-15-1M | Din 35 Rail 15 deep unslotted 1 meter | 50 |
| CA701-15-1M-S | Din 35 Rail 15 deep slotted 1 meter | 50 |
| CA701-15-2M | Din 35 Rail 15 deep unslotted 2 meter | 50 |
| CA701-15-2M-S | Din 35 Rail 15 deep slotted 2 meter | 50 |
| CA103 | EndClamp in Polyamide suitable for Din 35/Din 35-15 rails | 50 |
| CA104 | EndClamp in Polyamide suitable for Din 35/Din 35-15 rails | 50 |
| EPCX10/3 | End Plate for EPCX10/3 | 50 |
| SCS0.8/4 | Electricians Screwdriver for slotted screws | 10 |
| CA509/K10 | Marking Tag Blank suitable for CTS10U / CGT10U / CGT10N / CHV10U / CTS10USC / STH4 / STH4DT / STH4DTSH / CSC10T Terminal Blocks | 100 |
| WLX10 | Shockproof warning label for CX10 series. | 20 |
| JX10/2 | Shorting Link for 10 mm wide TB | 20 |
| JXS10/2.5 | Step Down Shorting Link for CX series | 10 |
| MC10 | MARKER CARD 10MM PITCH WITH 42 TAGS | 10 |
