Connectwell CX35 Spring Clamp Feed Through Terminal Block
35 sq.mm Spring Clamp Feed Through Terminal Blocks
The Spring Clamp is operated by using a screw driver to provide an access to the wire through an opening in the spring clamp. The inserted wire gets clamped on to the current bar when the screw driver is removed.
Description
| ORDERING INFORMATION | ||
| CAT. NO. | DESCRIPTION | STD. PACK |
| CX35 | 35 sq.mm Feed Through Spring Clamp Terminal Block in Grey colour | 15 |
| CX35BU | 35 sq.mm Feed Through Spring Clamp Terminal Block in Blue colour | 15 |
| ACCESSORIES | ||
| CAT. NO. | DESCRIPTION | STD. PACK |
| CA701-1M | Din 35 Rail unslotted 1 meter | 50 |
| CA701-2M | Din 35 Rail unslotted 2 meter | 50 |
| CA701-2M-S | Din 35 Rail slotted 2 meter | 50 |
| CA701-1M-S | Din 35 Rail slotted 1 meter | 50 |
| CA701-15-1M | Din 35 Rail 15 deep unslotted 1 meter | 50 |
| CA701-15-1M-S | Din 35 Rail 15 deep slotted 1 meter | 50 |
| CA701-15-2M | Din 35 Rail 15 deep unslotted 2 meter | 50 |
| CA701-15-2M-S | Din 35 Rail 15 deep slotted 2 meter | 50 |
| CA103 | EndClamp in Polyamide suitable for Din 35/Din 35-15 rails | 50 |
| CA702 | End Clamp in Polyamide 66 suitable for Din 32 / Din 35 / Din 35-15 Rails | 50 |
| CA802 | End Clamp in Polyamide suitable for Din 35 / Din 35-15 Rails | 50 |
| EPCSC16T | End Plate in Grey. | 50 |
| EPCSC16TBU | End Plate in Blue colour | 50 |
| CA801/5 | Insulated Push-In Type shorting link | 100 |
| CA509/K12 | Marking Tag Blank suitable for CTS16U / CTS25UN / CGT16N / CDB25 / CMDB25 / CSC16T / CSCG16T / CY16 / CYG16 Terminal Blocks | 100 |
| SWL16 | Warning label suitable for 12mm wide terminal block | 50 |
| SCS1/5.5 | Electricians Screwdriver for slotted screws | 10 |
| JXS16/2.5 | Step Down Shorting Link for CSC16T to CX2.5 and CP2.5 series Terminals | 10 |
| MC12 | MARKER CARD 12MM PITCH WITH 36 TAGS | 10 |
